Powder Coated Options |
||||||||||||||||
|
LIP-2gA |
LOWER INTERCOOLER 'S' PIPE (stock replacement) |
|
Our Lower Intercooler
Pipe fits T25,T28 and down-flow turbos with welded 90deg elbows. It's
made from 2 1/4" outside diameter x 18ga thk mandrel bent steel
tubing. It replaces the stock rubber hose for complete hard pipe
system. Includes two rubber couplers and four SS lined
worm-drive clamps.
2 1/4 size fits to fit stock IC. 2 1/2" size is enlarged at the IC end
to fit 2 1/2" IC inlet
|
LOWER INTERCOOLER PIPE for 14b & 16g Turbos Fits 5spd cars only, NOT automatics |
|
|
Set of hard pipes fits 14b or 16g turbo compressor outlet to the stock or a big side mount intercooler. The short outlet elbow is 1 3/4" expanding to 2". The long pipe is 2" (giving more room for the intake and upper IC pipes) expanding to 2 1/4" at the bottom where it connects to the short 2 1/4" section. Includes all stainless steel lined worm drive clamps, rubber couplers, compressor outlet gasket, porting template and two SS screws. 2 1/2" model is 2 1/4" in the long section with 2 1/2" lower section. |
Lower IC Pipe Set for 20g, Garrett and Other Down-flow Turbos |
|
|
The Lower Pipes are
2 1/4" dia. mandrel bent steel tubing except for the compressor
outlet elbow which is 2"at the compressor. These fit the Super
Big Side mount or your stock side mount IC. Includes all stainless
steel hose clamps & couplings. D2 model is expanded to 2 1/2" at
the IC end.
|
